Produktai skirti pirkti alų urmu (4)

Il nostro Alca 2 è fortemente alcalino e sgrassante, con un minore dosaggio è la soluzione ideale per rimuovere le macchie più difficili dai tessuti. Grazie alla sua formula avanzata, è in grado di agire efficacemente su una vasta gamma di macchie, come quelle di grasso, olio, vino, caffè e altro ancora. Il nostro Alca 2 usato nel prelavaggio oppure anche durante il lavaggio, scioglie facilmente lo sporco. Usato contemporaneamente con i nostri detersivi per una rimozione totale dello sporco, scioglie velocemente il grasso tenendolo sollevato dai tessuti senza che ricada su di essi e, miscelandosi con l’acqua, viene facilmente rimosso. Prodotto da usare con pompe di dosaggio. Prova il nostro alcalino sgrassante contro le macchie difficili in abbinamento al detersivo oggi stesso e scopri la differenza!

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Il nostro alcalino sgrassante è la soluzione ideale per rimuovere le macchie più difficili dai tessuti. Grazie alla sua formula avanzata, questo prodotto è in grado di agire efficacemente su una vasta gamma di macchie, come quelle di grasso, olio, vino, caffè e altro ancora. Il nostro alcalino sgrassante, usato nel prelavaggio oppure anche durante il lavaggio, scioglie lo sporco. Usato contemporaneamente con i nostri detersivi, scioglie velocemente il grasso tenendolo sollevato dai tessuti senza che ricada su di essi e, miscelandosi all’acqua, viene facilmente rimosso. Prodotto da usare con pompe di dosaggio. Prova il nostro alcalino sgrassante contro le macchie difficili in abbinamento al detersivo oggi stesso e scopri la differenza!

An anti-dust chemical/mechanical revitalising hardener for concrete flooring and screeds, consisting of an aqueous solution of mineral silicates and fluosilicates, activated by specific wetting agents. It is applied in several coats of decreasing dilution in water, with a brush or mechanical “scrubber”. Specific anti-dust treatments for industrial flooring or concrete slabs that have lost their original “vitality”. It reacts with the calcium compounds, soluble and unstable, present in of concrete products, transforming them into new stable, insoluble and resistant compounds. Consequent increases in resistance to wear and tear of the order of 200% -400%, significant increases in chemical stability, resistance to freeze-thaw cycles etc. Reactive impregnations for stabilising chemical and mechanical structures and concrete products. Hardening, anti-dust, anti abrasive and anti-corrosion treatments for concrete floorings. Adjustment of the chemical and mechanical performance of products for the industrial, rural and livestock construction (on horizontal surfaces). Apply, preferably with a brush or with "washer dryer" machine on the basis of the following indications: - Porous surfaces: repeated applications of a solution of water and QL Fluosil at a ratio in 1:1 - Compact surfaces: apply three coats, with decreasing dilution with water. 1a coat 1:3, 2a coat 1:2, 3a coat 1:1. The consumption of QL Fluosil will be proportional to the absorption of the floor to be treated. Indicatively a porous surface will consume about 400 g/m², while a surface with normal porosity will consume 250-300 g/m². Leave the product to dry between one coat and the next and then, after the last coat, wash with copious amounts of water. Protect glass and aluminium surfaces during application. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".